background image

32  GB

Disposal / Declaration  of  Conformity / Manufacturer

Preparing  for  use / Maintenance  and  cleaning / Service  centre / Warranty

Q

   Replacing a drive belt  

(see Figs. F + G)

 

DANGER OF INJURY!

Before you carry out any work on the device always 
pull the mains plug out of the mains socket.

   

Release the screws 

5

 and remove the belt 

cover 

4

   

Remove the worn drive belt 

23

.

   

First place the new drive belt 

23

 on to the small 

belt wheel 

25

 and then pull the drive belt 

23

 

on to the large belt wheel 

24

 by rotating it.

   

Put the belt cover 

4

 back into position and 

fasten it into place with the screws 

5

.

Q

  Maintenance and cleaning

 

DANGER OF INJURY!

Before you carry out any work on the device always 
pull the mains plug out of the mains socket.

   

Always keep the device and the ventilation 
slots clean. This way you will work more safely 
and produce better results.

   

Clean out the planing debris removal port 

3

 

regularly.

   

Clean out a blocked planing debris removal 
port using suitable means (e.g. piece of wood, 
air under pressure, etc.). 

   

Use a dry cloth to clean the housing.

   

Remove any adhering planing dust with a  
narrow paint brush.

   

In no circumstances use sharp objects, or petrol, 
solvents or cleaning agents that might attack 
plastic. Do not allow any liquids to enter the  
inside of the device.

Q

  Service centre

 

Have your device repaired 

 

 only by qualified specialist personnel 
using original manufacturer parts only.

 

This will ensure that your device remains safe 
to use.

 

If the plug or mains lead 

 

 needs to be replaced, always have 

the replacement carried out by the 
manufacturer or its service centre.

 This 

will ensure that your device remains safe to use.

Q

 Warranty

The warranty for this appliance is for 3 
years from the date of purchase. The ap-
pliance has been manufactured with care 
and meticulously examined before deliv-
ery. Please retain your receipt as proof 
of purchase. In the event of a warranty 
claim, please make contact by telephone 
with our Service Department. Only in this 
way can a post-free despatch for your 
goods be assured.

The warranty covers only claims for material and 
maufacturing defects, but not for transport damage, 
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering 
not carried out by our authorized service branch. Your 
statutory rights are not restricted in any way by this 
warranty.

The warranty period will not be extended by repairs 
made unter warranty. This applies also to replaced 
and repaired parts. Any damage and defects extant 
on purchase must be reported immediately after 
unpacking the appliance, at the latest, two days after 
the purchase date. Repairs made after the expiration 
of the warranty period are subject to payment.

GB
Service Great Britain
Tel.:  

 0871 5000 720  
(0,10 GBP/Min.)

e-mail:   [email protected]

IAN 93528

Summary of Contents for PEH 30 A1 ELECTRIC PLANER



































Reviews: