PDSS 310 B5
GB
│
MT
│
53
■
■
If the power cable of this tool is damaged, it
must be replaced by the manufacturer or its
customer service department or by a similarly
qualified person in order to avoid hazards .
■
Do not use the tool if you are tired or under
the influence of drugs, alcohol or medication .
A moment of inattention when operating the
tool can result in serious injuries .
■
Do not inhale the exhaust air directly . Avoid
getting exhaust air in your eyes . The exhaust air
from the compressed air tool can contain water,
oil, metal particles or dirt from the compressor .
These can be hazardous to health .
WARNING!
►
BE CAREFUL WHEN PUTTING DOWN THE
TOOL! Always put the tool down in such a
way that it does not lie on the trigger . Under
certain circumstances, this might cause an
accidental activation of the tool, which in turn
might lead to hazards .
■
Only suitable accessories may be used . These
can be purchased from the manufacturer .
Failure to use original accessories can result in
hazards .
■
Use only filtered and regulated compressed air .
Dust, corrosive vapours and/or moisture can
damage the motor of a compressed air tool .
■
The hose must be designed for min . 6 .3 bar or
125 psi, corresponding to at least 150% of the
maximum pressure generated in the system .
■
The tool and the supply hose must be fitted with
a hose coupling that allows the pressure to be
relieved completely when the coupling hose is
disconnected .
■
DANGER! Avoid contact with live cables .
This tool is not insulated against electric shock .
WARNING! RISK OF INJURY!
►
At high working pressures, kickback forces
can occur . Under certain circumstances these
can cause hazards due to continuous loads .
■
If you are inexperienced with the tool, seek
training in how to use it safely .
WARNING! RISK OF INJURY!
►
RISK OF PUNCTURE WOUNDS! Do not
treat an injection wound as a simple cut .
A highpressure jet can inject toxins into the
body and cause serious injuries . In the event
of injection into the skin, seek medical assis
tance immediately .
■
The compressed air tool must not be modified in
any way without the manufacturer's approval .
■
Use the compressed air tool only at the specified
pressure .
■
The compressed air tool must always be discon
nected from the air supply after use and for as
long as it is not in use .
■
The compressed air tool must not be used if it is
not airtight or if it requires repair .
■
Never connect the compressed air tool using a
compressed air hose whose pressure exceeds
6 .3 bar .
■
Keep work area clean and well lit . Cluttered or
dark areas invite accidents .
This gives you better control of the tool in un
expected situations .
WARNING!
►
Have your power tool serviced by qualified
trained personnel using only original spare
parts . This ensures that the safety of the tool is
maintained .
■
Keep children and other persons away from the
tool during operation . Distractions can cause
you to lose control of the tool .
■
Dress properly . Do not wear loose clothing or
jewellery . Keep your hair, clothing and gloves
away from moving parts . Loose clothes, jewel
lery or long hair can be caught in moving parts .
■
Put the trigger and the tool away in the event of
an unexpected compressor failure .
■
Wherever possible, use a condensate separator
or drain the condensate (water) from the hoses
and tubing regularly before and during the use
of the compressed air tools .
