Parkside PDSLG 20 B1, Translation Of The Original Instructions

Page: 18 / 86

18
GB
Storage
• Remove the battery before storing the
unit for longer periods of time (e.g.
hibernation).
• Store the battery only in a partially
charged state. During prolonged stor-
age, 2 to 3 LEDs should be illuminated.
• During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
• The ideal storage temperature for the
battery is between 0 °C and 45 °C.
Avoid extreme cold or heat during stor-
age to ensure the battery output is not
adversely affected.
Wall mounted charger
(optional)
You can also mount the charger (5) on the
wall.
• Using dowels, place two screws hori-
zontally 152.4 mm (6”) apart at the
desired position on a wall.
• The screw head can have a diameter
of 7 - 10 mm.
• Leave the screw heads protruding at
a distance of approx. 10 mm from the
wall.
• With the openings of the wall bracket,
you can attach the charger (5) to the
two screws and pull the charger down
until it stops.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to find these or consult an in
-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
fire. Contact with a gas pipe
can result in an explosion.
Damage to a water pipe can
lead to property damage and
electric shock.
Cleaning
Clean the charger (5) with a dry brush or
dry cloth.
Keep the charger (5) away from moisture
and sharp objects.
Maintenance
• The equipment is maintenance free.
Disposal/environmental
protection
Remove the battery from the device and re-
cycle the device, battery, accessories and
packaging in an environmentally-friendly
manner.
Electrical devices must not be dispo-
sed of with domestic waste.
Do not throw batteries into domestic
waste, fire (risk of explosion) or wa
-
ter. Damaged batteries can harm the
environment and your health if poisonous
fumes or liquids escape.
Directive 2012/19/EU on waste electrical
and electronic equipment: Consumers are
legally obliged to recycle electrical and
electronic equipment in an environmentally
sound manner at the end of its life. In this
way, environmentally friendly and resour-
ce-saving recycling is ensured.
Depending on implementation in national
law, you may have the following options:
• Return to a shop,