background image

12  GB/IE

Information about … / Environmental instructions and disposal information

… / Start-up / After  initial  use / Maintenance / Cleaning  … / Information  about  …

performance. Therefore, requirements for length 
and diameter of the hose shall be specified.

  

Never carry an air tool by the hose.

  Start-up (see Fig. B / C)

  

Screw the included plug nipples 

4

 into the air 

connection after first wrapping the thread with 
2–3 layers of sealing tape (not included).

  

Attach the required plug-in attachment to the 
square intake (

7

 - 

11

 see Fig. A). 

  

Set the correct direction of rotation on the pivot 
bolt 

11

R = counterclockwise / remove screw, 
F = clockwise / tighten screw. 

  

Attach the plug-in attachment to the screw head. 

  

Activate the trigger 

2

Note: 

the connection to the compressed air source 

is established through a flexible air hose with quick 
connector.
The ratcheting screwdriver will perform best when 
used with an LW 10 mm air hose.

  After initial use

Once the task has been finished the equipment must 
be disconnect from the compressed air supply 

3

.

 Maintenance

Following the maintenance information specified here 
will ensure a long service life for the product and 
trouble-free operation. Your ratchet screwdriver work-
ing properly for a long time requires daily lubrication.

You may choose from the following options:

With an oil-fog lubricator

A complete maintenance unit includes an oil-fog  
lubricator and is attached to the compressor.

Manually

Add 3–5 drops of speciality tool oil to the compressed 
air connection before every use. If the compressed 
air tool is not being used for several days, add 5–10 
drops of oil to the compressed air connection be-
fore switching it on.

  

Always store your compressed air tools in dry 
rooms.

  Cleaning and Care

  

Never clean with liquids such as petrol, solvents 
or water.

  

Do not allow liquids to enter the tool.

  

Only clean the tool with a dry cloth.

   Information about warranty 

and service processing

Creative Marketing Consulting GmbH 
warranty

Dear customer,  
the warranty for this device is 3 years from the date 
of purchase. In the event of product defects, you 
have legal rights against the retailer of this product. 
Your statutory rights are not limited in any way by 
our warranty detailed below.

  

Warranty terms

The warranty period begins on the date of purchase. 
Please retain the original receipt safely. This docu-
ment is required as your proof of purchase.
Should this device show any fault in materials or ma-
nufacture within three years from date of purchase, 
it will be repaired or replaced – at our choice – by 
us free of charge. This warranty is conditional on the 
defective device and the proof of purchase (receipt) 
being presented within the three year warranty pe-
riod, and that there is a brief written description of 
the nature of the defect and of the date it arose.
If the defect is covered by our warranty, we will re-
turn the repaired device or replacement thereof. A 

Summary of Contents for PDRS 6.3 A1




































Reviews: