Parkside PDM 300 C3, Operating Instructions And Safety Instructions

Page: 6 / 120

PARKSIDE PDM 300 C3
4 - English
These operating instructions have a fold-out cover. On the inside of the cover is a
diagram of the multimeter with the components numbered. The meanings of the
numbers are as follows:
1 Display
2 HOLD button (memory button)
3 Range selector switch
4 COM connection (earth )
5
OUT INPUT connection ( = square wave signal)
6 Measuring probes (inc. cables)
7 10 A connection
8 SELECT button (switches between direct/alternating current)
3. Technical specifications
Display 3 ½ digit LC display, max. display:
1999
Measurement rate approx. 2 to 3 measurements/second
Measurement cable length approx. 80 cm each
Battery type 9 V block battery
Overvoltage category CAT III 300 V (digital multimeter and
measurement cables)
Hold function yes
Automatic polarity display yes
Low battery display yes
Auto power OFF function yes
Operating temperature, humidity 0 °C to +40 °C, max. 75 % RH
Storage temperature, humidity -10 °C to +50 °C, max. 85 % RH