Parkside PDLS 5 B1, Operation And Safety Notes Translation Of The Original Instructions

Page: 6 / 104

7 GB
Introduction
Compressed air spray gun
PDLS 5 B 1-2:
This device is designed for injecting and
spraying on detergents and spray oils, as
well as waxing and sealing. You can process
spraying substances up to a maximum of
80 DIN / sec. using the device.
Compressed air tyre inflator
PDLS 5 B 1-3:
The device is intended to be used to pump
up tyres with a Schrader valve. After the
filling process, the tyre pressure can be read
using the pressure gauge.
NOTE:
The pressure gauge 18 is not trade-
approved. Therefore you must check the tyre
pressure as soon as you can using a suitable
device at a petrol station or car repair shop.
Compressed air blow gun
PDLS 5 B 1-4:
This device is designed cleaning objects and
hard-to-reach areas as well as blow-drying
damp areas. Use the product only as
described and only for the work areas as
stated. Any other use or modification of the
device is considered a misuse and carries
a risk of serious accidents and/or injury.
Damage or injury caused by misuse or
disregarding the above warning is not
covered by the warranty or any liability
on the part of the manufacturer.
Use the product only as described and only
for the work areas as stated. Any other use
or modification of the devices is considered
a misuse and carries a risk of serious
accidents and/or injury. Damage or injury
caused by misuse or disregarding the above
warning is not covered by the warranty or
any liability on the part of the manufacturer.
The devices are intended for use by private
consumers only. Commercial use will void
the guarantee.
• Package contents
1 Compressed air paint spray gun PDLS 5 B1-1
1 Compressed air spray gun PDLS 5 B1-2
1 Compressed air tyre inflator PDLS 5 B1-3
1 Compressed air blow gun PDLS 5 B1-4
1 Aluminium suction pot 1000 ml
1 Suction pot 900 ml
1 Compressed air hose PE 5 m
1 Set of operating instructions
• Parts description
Figure A:
1 Nozzle
2 Lock nut
3 Ventilation opening
4 Suction pot
5 Compressed air connection for the
compressed air spray gun
6 Trigger arm for the compressed air
spray gun
Figure B:
7 Paint quantity adjusting screw
8 Trigger arm for the compressed air paint
spray gun
9 Compressed air connection for the
compressed air paint spray gun
10 Aluminium suction pot
11 Lid
12 Fixing nuts
13 Nozzle head
14 Union nut
15 Control
Figure C:
16 Compressed air connection for the
compressed air blow gun
17 Trigger arm for the compressed air
blow gun
327357_1904_Druckluft-Set_5tlg_PDLS_5_B1_content_LB4.indb 7 10.10.19 16:05