■
14
│
GB
│
IE
PBS 900 C3
BELT SANDER PBS 900 C3
Introduction
Congratulations on the purchase of your new ap-
pliance . You have selected a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .
Intended use
The belt sander is designed for the dry surface
sanding of wood, plastic, metal and plaster and
painted surfaces (depending on the type of sand-
paper used) . The appliance may only be used
for dry sanding . Please note that you need to use
appropriate abrasive belts with different grains for
working different materials, and that you may need
to adapt the speed to suit the material . The appli-
ance is not intended for commercial use . Any other
uses of or modification to the appliance is deemed
to be improper and carries the risk of serious per-
sonal injury . The manufacturer accepts no responsi-
bility for damage(s) attributable to misuse .
Depicted components
Speed preselector wheel
Lock button
ON/OFF switch
Drive belt cover
Extraction nozzle
Adjustment screw for belt tracking
Additional handle
Ventilation slits
Clamping lever
Dust collector
Dust extraction adapter
Reducer
Screw clamps 2 x
Package contents
Check the package contents immediately
after unpacking the appliance:
1 belt sander PBS 900 C3
1 abrasive belt
1 dust collector
1 dust extraction adapter and reducer
(for external dust extraction)
2 screw clamps
1 set of operating instructions
Technical details
Rated voltage:
230 V ∼ 50 Hz
(alternating current)
Rated power
consumption:
900 W
Idling belt speed:
240–400 m/min
Rated idling speed:
n
0
450–750 rpm
Abrasive belt:
75 x 533 mm
Protection class:
II / (double insulation)
Noise emission value:
Noise measurement value determined in accordance
with EN 62841 . The A-rated noise level of the tool
is typically:
Sound pressure level:
L
pA
= 85 dB(A)
Uncertainty:
K
pA
= 3 dB
Sound power level:
L
WA
= 96 dB(A)
Uncertainty:
K
WA
= 3 dB
Wear hearing protection!
Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Vibration emission value:
a
h
≤ 6 .6 m/s
2
Uncertainty K = 1 .5 m/s
2
Summary of Contents for PBS 900 C3
Page 3: ...A B C D ...
Page 49: ... 46 NL BE PBS 900 C3 ...
Page 73: ... 70 CZ PBS 900 C3 ...
Page 85: ... 82 SK PBS 900 C3 ...
