Parkside PBS 900 C3, Translation Of The Original Instructions

Page: 23 / 86

■ 20 │
GB
│
IE
PBS 900 C3
Material/
working area Plastics
Rough sanding
(grain size) 120
Finishing (grain size) 240
Speed preselection low/medium
Material/
working area Non-ferrous metals
(e.g. aluminium)
Rough sanding
(grain size) 80
Finishing (grain size) 150
Speed preselection medium/high
Stationary work
♦ Turn the power tool over as shown in figure D
and place it on a stable worktop .
♦ Attach the two screw clamps to the power
tool as shown and tighten them .
♦ Set the speed using the speed preselector
wheel .
Tips and tricks
■ Never use the same abrasive belt to process
wood and metal .
■ Worn or cracked abrasive belts can damage
the workpiece . Therefore, be sure to replace
worn abrasive belts before starting work .
■ Always hang up the abrasive belts to store
them, as kinks etc . can make them unusable .
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
The belt sander is maintenance-free .
■ Always clean the appliance directly after finishing
work .
■ Use a dry cloth to clean the housing . Under
no circumstances should you use detergents,
solvents or abrasive cleaners .
■ Ensure ventilation openings are always free .
■ Remove any adhering grinding dust with a
brush .
Disposal
The packaging is made from environmen-
tally friendly material and can be dis-
posed of at your local recycling plant .
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product .