Parkside PAT 4 D5, Translation Of The Original Instructions

Page: 19 / 146

19 GB
Pull back on the pusher
3
(see Fig. B).
Add staples to the magazine
4
(see Fig. C).
After adding staples, slide the pusher
3
in again until the maga-
zine
4
is fully closed. Release the release button
3a
. It must click
and lock into place for the magazine
4
to be closed correctly.
Note: Use the window on the fill indicator
5
to see if the maga-
zine
4
is empty.
Adding nails
Set the On / Off switch
8
to the “0“ position before working on
the product.
Turn the product over.
Squeeze the release button
3a
(see Fig. B).
Pull back on the pusher
3
(see Fig. B)
Follow icon shown on pusher
3
(see Fig. C) and add nails to the
magazine
4
(see Fig. C)
After adding nails, slide the pusher
3
in again until the magazine
4
is fully closed, (see Fig C).
Release the release button
3a
. It must click and lock into place for
the magazine
4
to be closed correctly.
Note: Use the window on the fill indicator
5
to see if the
magazine
4
is empty.
Functions
Stapling & Nailing
Set the On / Off switch
8
to the “I“ position to switch the product on.
Press the safety contact
6
into the work piece.
Squeeze the trigger
1
whilst holding the product against the work
piece to drive a staple / nail into it.