Parkside PAT 4 D5, Translation Of The Original Instructions

Page: 18 / 146

18 GB
Do not continuously pull the trigger
1
to prevent damaging the
built-in rechargeable battery.
Set the On / Off switch
8
to the “0“ position if the product will not
be used or will be stored for extended periods.
Note: If the charge indicator
9
lights up red during use, the charge
is below 30 % and the battery must be recharged.
Starting the charging process (see Fig. A)
Connect the USB cable
7a
to the USB port
7b
of charger 7 .
Connect the other end of the USB cable
7a
to the USB Type C
socket
2
on the product.
Connect the charger
7
to a 100–240 V∼ 50 / 60 Hz power
source. The charge indicator
9
shows the charging progress. It
will light up red whilst charging. Once the battery is charged up, it
lights up green.
Completing the charging process
Disconnect the charger
7
from the power source.
Disconnect the USB cable
7a
from the USB Type C socket
2
on
the product.
Note: The product cannot be used whilst charging. It is normal
for the handle to warm up slightly whilst charging.
Initial use
Adding staples
Set the On / Off switch
8
to the “0“ position before working on
the product.
Turn the product over.
Squeeze the release button
3a
(see Fig. B).