![background image](http://html1.mh-extra.com/html/parkside/passp-20-li-a1/passp-20-li-a1_translation-of-the-original-instructions_4064369027.webp)
PASSP 20-Li A1
GB
│
IE
│
23
■
Warranty period and statutory claims for
defects
The warranty period is not prolonged by repairs
effected under the warranty. This also applies to
replaced and repaired components. Any damage
and defects present at the time of purchase must
be reported immediately after unpacking. Repairs
carried out after expiry of the warranty period shall
be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accord-
ance with strict quality guidelines and inspected
meticulously prior to delivery.
The warranty covers material faults or production
faults. The warranty does not extend to product
parts subject to normal wear and tear or to fragile
parts which could be considered as consumable
parts such as switches or parts made of glass.
The warranty does not apply if the product has
been damaged, improperly used or improperly
maintained. The directions in the operating instruc-
tions for the product regarding proper use of the
product are to be strictly followed. Uses and
actions that are discouraged in the operating
instructions or which are warned against must be
avoided.
This product is intended solely for private use and
not for commercial purposes. The warranty shall
be deemed void in cases of misuse or improper
handling, use of force and modifications / repairs
which have not been carried out by one of our
authorised Service centres.
The warranty period does not apply to
■
Normal reduction of the battery capacity
over time
■
Commercial use of the product
■
Damage to or alteration of the product by the
customer
■
Non-compliance with safety and maintenance
instructions, operating errors
■
Damage caused by natural hazards
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
■
Please have the till receipt and the item number
(e.g. IAN 12345) available as proof of purchase.
■
You will find the item number on the type plate
on the product, an engraving on the product,
on the front page of the operating instructions
(below left) or on the sticker on the rear or
bottom of the product.
■
If functional or other defects occur, please
contact the service department listed either by
telephone
or by
.
■
You can return a defective product to us free of
charge to the service address that will be pro-
vided to you. Ensure that you enclose the proof
of purchase (till receipt) and information about
what the defect is and when it occurred.
You can download these instructions
along with many other manuals,
product videos and installation
software at www.lidl-service.com.
This QR code will take you directly to the Lidl ser-
vice page (www.lidl-service.com) where you can
open your operating instructions by entering the
item number (IAN) 329707_2001.
Service
WARNING!
►
Have your tools repaired by the Service
Centre or a qualified electrician and only
using genuine replacement parts.
This will
ensure that the safety of the appliance is
maintained.
►
Ensure that the power plug or the mains
cable is replaced only by the manufacturer
of the tool or by an approved customer ser-
vice provider.
This will ensure that the safety
of the appliance is maintained.
IB_329707_PASSP20-LiA1_LB8.indb 23
31.08.20 09:39
Summary of Contents for PASSP 20-Li A1
