PASSP 20-Li A1
GB
│
IE
│
17
■
NOTE
►
Please note that the maximum performance
of the device can only be achieved when
using the PAP 20 A3 battery.
High-speed battery charger: PLG 20 A3*
INPUT:
Rated voltage:
230–240 V ~, 50 Hz
(AC)
Rated power
consumption: 120
W
Fuse (internal):
3.15 A
T3.15A
OUTPUT:
Rated voltage:
21.5 V
(DC)
Rated current:
4.5 A
Charging time:
approx. 60 min
Protection class:
II / (double insulation)
* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise emission value
Noise measurement value determined in
accordance with EN 62841. The A-rated
noise level of the power tool is typically:
Sound pressure level:
L
PA
= 109.7 dB (A)
Uncertainty K
PA
=
3
dB
Sound power level
L
WA
= 120.7 dB(A)
Uncertainty K
WA
=
3
dB
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Tightening screws and nuts of maximum
permissible size
a
h
= 8.245 m/s
2
Uncertainty
K = 1.5 m/s
2
Wear ear muffs!
NOTE
►
The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
►
The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
►
Depending on the manner in which the power
tool is being used and, in particular, the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during actual
use of the power tool.
►
Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting the
working time. Wherein all states of operation
must be included (e.g. times when the power
tool is switched off and times where the power
tool is switched on but running without load).
General power tool
safety warnings
WARNING!
►
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool.
Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
IB_329707_PASSP20-LiA1_LB8.indb 17
31.08.20 09:39
Summary of Contents for PASSP 20-Li A1
