Parkside PAHE 20-Li B2, Original Instructions Manual

Page: 23 / 160

23
CY GB
Trouble Shooting
Problem Possible cause Troubleshooting
Device does not
start
Discharge the battery (11)
Charge the battery (observe the se-
parate operating instructions for the
rechargeable battery and charger)
Battery (11) not inserted
Insert the rechargeable battery (obser-
ve the separate operating instructions
for the rechargeable battery and char-
ger)
On/off switch (13) is bro-
ken
Repair by service centre
Defective motor
Device works with
interruptions
Internal loose contact
Repair by service centre
On/off switch (13) is bro-
ken
Saw is having
difficulties running,
chain jumps off
Insufficient chain tension
Check chain tension
Chain gets hot,
smoke develops
while sawing, the
rail changes colour
Too little chain oil
Check oil level and top of chain oil if
necessary, check the oil automation
and clean the oil drainage duct as nee-
ded, or arrange for repair by customer
service
Bad cutting output
Saw chain (2) dull
Sharpen or replace saw chain (service
centre)
Insufficient chain tension
Check chain tension