Parkside PABSP 20-Li B2, Operation And Safety Notes

Page: 38 / 132

37 GB/IE
˜
Cleaning
¾
Never allow fluids to get into the product .
¾
The product must always be kept clean, dry
and free from oil or grease . Remove debris
from it after each use and before storage .
¾
Regular and proper cleaning will help ensure
safe use and prolong the life of the product .
¾
Clean the product with a dry cloth . Use a
soft brush for areas that are hard to reach .
¾
In particular clean the air vents after every
use with a cloth and soft brush .
¾
The vents must always be clear .
NOTE
u
Do not use chemical, alkaline, abrasive
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces .
˜
Maintenance
¾
The product is maintenance-free .
¾
Before and after each use, check the product
and accessories (e .g . accessory tools) for
wear and damage . If required, exchange
them for new ones as described in this
instruction manual . Observe the technical
requirements (see “Technical data”) .
˜
Repair
This product does not contain any parts that can
be repaired by the user . Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired .
˜
Storage
¾
Push the rotation control switch 5 to the
centre position to lock the on/off switch 6 .
¾
Clean the product as described above .
¾
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place .
¾
Always store the product in a place that is
inaccessible to children . The ideal long term
storage (longer than 3 months) temperature
is b20 and +26 °C .
¾
Guide the drill bit into the bit holder 8 .
¾
Store the product in its carrying case 19 .
Battery pack advice
¾
Only store the battery pack 10 partially
charged . The battery pack should be
charged to 40 to 60 % (red and orange LED
in the charge indicator 14 light up) before
storing for extended periods .
¾
Check the battery pack 10 charge about
every 3 months when storing for extended
periods . Recharge as necessary .
˜
Transportation
¾
Push the rotation control switch 5 to the
centre position to lock the on/off switch 6 .
¾
Transport the product in its carrying case 19 .
¾
Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles .
¾
Secure the product to prevent it from slipping
or falling over .