Parkside PABSP 20-Li B2, Operation And Safety Notes

Page: 33 / 132

32 GB/IE
Disregarding this instruction is
hazardous .
¾
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
¾
Protect the electrical parts
against moisture . Do not
immerse such parts in water
or other liquids to avoid
electrical shock . Never hold
the appliance under running
water . Pay attention to the
instructions provided for
cleaning, maintenance and
repair .
¾
The appliance is suitable for
indoor use only .
¾
ATTENTION! This charger is
only designed for charging the
battery pack types:
Parkside 20 V
battery pack
PAP 20 A1 2 Ah 5 cells
PAP 20 A2 3 Ah 10 cells
PAP 20 A3 4 Ah 10 cells
¾
An up-to-date list of battery
compatibility can be found at
www .lidl .de/akku .
˜
Before first use
˜
Accessories
To operate this product safely and correctly, the
following accessories, i .e . tools and accessory
tools, are necessary:
¾
Suitable drill bits
¾
Suitable driver bits
¾
Cooling lubricant (cutting oil) suitable for
drilling in metal
¾
Suitable personal protective equipment
¾
Cross tip screwdriver
Accessories and accessory tools are available
through your authorised dealer . When buying
always consider the technical requirements of this
product (see “Technical data”) .
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer .
NOTE
u
This instruction manual contains
information and suggestions for several
accessory tools and their uses . The
accessory tools depicted are not included
in the shipment (see “Scope of delivery”),
but are meant to indicate additional
possibilities for using this product .
m
WARNING!
u
Do not use accessories not recommended
by Parkside . This may result in electric
shock or fire .
Suitable battery packs and chargers
Battery
pack:
Parkside 20 V battery pack
PAP 20 A1, PAP 20 A2, PAP 20 A3
Charger:
Parkside 20 V charger PLG 20 A1,
PLG 20 A2, PLG 20 B1, PLG 20 A3