35
GB/MT
Introduction / General safety advice
14
Laser oN / oFF switch
15
Cutting depth scale
16
Riving knife
17
Auxiliary handle
18
Drive spindle
19
Mounting flange
20
Clamping flange
21
Clamping screw with plain washer
22
Riving knife mounting
23
Mounting screws
24
Adapter for vacuum sawdust removal
Q
Included items
1 Circular saw
1 Guide fence
1 Adapter for vacuum sawdust removal
1 Allen key
2 Batteries, micro AAA 1.5 V (for laser)
1 operating instructions
Q
technical information
Nom. power input:
1450 W
Rated voltage:
230 V ~ 50 Hz
Mechanical output: 15 Nm max.
Noload speed:
n
0
1800 5000 min
1
Saw blade:
210 x 30 x 1.8 x 2.6 mm
Cutting depth at 90°: 0 75 mm
Cutting depth at 45°: 0 49 mm
Protection class:
II /
noise and vibration data:
Values determined in accordance with EN 60745
The sound pressure level (Aweighted) of the device
is typically 93 dB (A). Uncertainty K=3 dB. The
sound level while working can exceed 104 dB (A).
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration a
h
= 2,309 m / s
2
Uncertainty K = 1,5 m / s
2
WARnInG!
The vibration level given in
these instructions has been measured in accord
ance with a standardised measurement procedure
specified in EN 60745 and can be used to com
pare devices. Different uses of the device give rise
to different vibration levels and in many cases they
may exceed the values given in these instructions. It
is easy to underestimate the vibration load if the elec
trical power tool is used regularly in particular cir
cumstances.
note:
If you wish to make an accurate assessment
of the vibration loads experienced during a particular
period of working, you should also take into account
the intervening periods of time when the device is
switched off or is running but is not actually in use.
This can result in a much lower vibration load over
the whole of the period of working.
General safety advice
WARnInG!
Read all the safety advice and
instructions! Failure to observe the safety advice
and instructions may result in electric shock, fire
and / or serious injury.
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIoNS
IN A SAFE PLACE FoR FUTURE REFERENCE!
1. Your working area
a)
Keep your working area clean and
clutter-free.
Untidy or poorly lit working ar
eas can lead to accidents.
b)
Do not work with the device
in potentially explosive en-
vironments in which there
are inflammable liquids, gases or
dusts.
Electrical power tools create sparks,
which can ignite dusts or fumes.
c)
Keep children and other
people away while you are
operating the electrical tool.
Distractions can cause you to lose control of
the device.
PHKS_1450_Content_LB5.indd 35
30.07.2008 15:15:21 Uhr
