![background image](http://html1.mh-extra.com/html/parkside/kh-3107-hot-air-gun/kh-3107-hot-air-gun_operating-and-safety-instructions-manual_4038156006.webp)
ADVICE ON WORKING METHODS, TIPS AND TRICKS
Caution! Danger of fire and explosion.
Working with plastics, paints, varnishes and similar materials can give rise to flammable and poisonous gases.
This applies particularly when removing old paint.
Start off your work using a low temperature setting and test to find out the most suitable temperature. The appropriate distance from the nozzle
to the workpiece depends on the material you are working on.
Additional advice can be obtained from D.I.Y. or specialists shops and in specialist handicraft books.
Removing varnishes, see Figure (A)
For removing varnishes use the flat nozzle
or the spatula nozzle
. Soften the varnish evenly with hot air and lift it with a scraper. Make
sure that the scraper is always sharp and clean. Do not apply heat for too long as this burns the varnish and makes removal more difficult.
Where there is very little space in which to work, the thermal protective cover
can be screwed off.
Removing adhesives, stickers and adhesive residues
Use the flat nozzle
to remove adhesives. Many adhesives and stickers soften with the heat. The glued items can then be separated
and any residual adhesive removed.
Shaping plastic pipes
Use the reflector nozzle
for shaping plastic pipes. Avoid buckling the pipe by filling it with sand and sealing both ends. By moving the gun
from side to side you will warm the pipe evenly.
Use the cone nozzle
for precise work, e.g. For soldering and de-soldering. Caution! Do not overheat the equipment.
Unfreezing water pipes – Do not use for thawing PVC pipes.
Use the reflector nozzle
for thawing water pipes and always warm the pipe from the frozen part outwards. Caution! It is extremely difficult
to tell the difference between water pipes and gas pipes. Copper pipes have soldered joints and therefore are not to be heated above 200 0 C.
Use hot air to dry off joints and scratches before painting.
Threaded connections, e.g. on cars, are often rusted or very securely joined together. Warm threaded connections with hot air and then the
bolts can be easily loosened.
Dry the joints between ceramic tiles and save time. The time required for grout to dry e.g. in the bathroom, WC or kitchen can be considerably
reduced by using hot air. This allows you to start the final cleaning process on the same day.
If no amount of soaking with water is enough to remove old wallpaper - hot air can help. Apply hot air to well-soaked wallpaper and it will
come off easily with a scraper.
Dry out weeds and their seeds. There is no need to pollute the environment with chemicals to remove weeds from between stones and paving
slabs. Hot air will dry out the weeds and their seeds.
Quickly bring the charcoal or briquettes in your barbecue to the right temperature and get it glowing without the use of any dangerous fluids.
Create a small glowing area first by placing some larger lumps of charcoal or briquettes in a corner of the barbecue with pieces of barbecue
lighter between them (small pieces are usually the best). Make sure the fire does not suffocate and is burning well. When all the pieces of
barbecue lighter have burned away and the charcoal has a white coating (if not, repeat the exercise with the pieces of barbecue lighter),
spread the glowing charcoal evenly in the barbecue tray and add the remaining charcoal over it. The process of getting the charcoal to glow
can be accelerated by applying hot air with the gun at its lower setting, see Figure (B). Depending on the quality of the charcoal or briquettes
you may have to watch out for sparks. Keep any flammable materials and objects at an appropriate distance and for your own safety, wear
protective glasses and clothing.
Further practical tips for power tools can be found in the accompanying booklet on safety advice.
We reserve the right to make technical modifications in course of further development.
6