Parkside 6.3 A2, Assembly, Operating And Safety Instructions, Translation Of The Original Instructions

Page: 18 / 121

18 GB/CY
ATTENTION: DISCONNECT COM-
PRESSED AIR BEFORE MAINTENANCE
WORK!
1. Keep the pneumatic devices clean.
2. Turn over the tool so that the compressed
air connection points upwards, and ap-
ply a few drops of pneumatic equipment
or motor oil SAE 10-20 into the com-
pressed air connection on the pneumatic
devices.
3. Press the trigger arm 2 to distribute the
oil more evenly. Hold a cloth or absor-
bent paper towel in front of the exhaust
air openings, and let the device run in
idle mode for a few seconds.
ATTENTION! EXCESS OIL IS BLOWN
OUT. KEEP THE DISCHARGE HOLE
AWAY FROM PERSONS AND OBJECTS.
„
Speed and vibrations must be checked
every time after maintenance and care.
„
The pneumatic tool should be kept and
stored in a dry room. Make sure that no
moisture can enter inside the pneumatic
device.
„
Check regularly the spindles, threads,
and clamping mechanisms for wear, and
the tolerances for fitting abrasives.
„
Before all maintenance, clean the device
of hazardous substances that have
deposited on it (during work process-
es). Avoid all skin contact with these
substances. Hazardous dust coming
into contact with skin may cause serious
dermatitis. Dust that is generated or
raised during maintenance work can be
breathed in.
z
Warranty and service
information
Warranty from Creative Marketing &
Consulting GmbH
Dear Customer,
The warranty for this device is 3 years from
the date of purchase. In the event of product
defects, you have legal rights against the re-
tailer of this product. Our warranty, outlined
below, does not limit your statutory rights.
z
Warranty terms
The warranty period begins on the date of
purchase. Please retain the original sales
receipt. This document is required as your
proof of purchase.
Should this product have a material or
manufacturing error within three years of the
purchase date, the product will be repaired
or replaced – dependent on our choice - by
us at no cost to you. This warranty service
requires that you retain proof of purchase
(sales receipt) for the defective device for
the three year period and that you briefly
explain in writing what the fault entails and
when it occurred.
If the defect is covered by our warranty, we
will return the repaired device or a replace-
ment thereof. A repair or exchange of the
device does not start a new warranty period.
z
Extent of warranty
The device has been manufactured accord-
ing to strict quality guidelines and meticu-
lously examined before delivery.
Operation / Warranty and service information