Parkside 373880 2104 Operating And Safety Instructions Manual Download Page 8

Page: 8 / 100

GB/IE/NI

2. Introduction

Manufacturer:
scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen

Dear Customer,

we hope your new tool brings you much enjoyment and suc-
cess.

Note:

According to the applicable product liability laws, the manu-
facturer of the device does not assume liability for damages
to the product or damages caused by the product that occurs
due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service techni-

cians,

• Installation and replacement of non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due to the

non-compliance of the electric regulations and VDE regula-
tions 0100, DIN 57113 / VDE0113.

Please consider:

Read through the complete text in the operating instructions be-
fore installing and commissioning the device.
The operating instructions are intended to help the user to be-
come familiar with the machine and take advantage of its ap-
plication possibilities in accordance with the recommendations.
The operating instructions contain important information on
how to operate the machine safely, professionally and econom-
ically, how to avoid danger, costly repairs, reduce downtimes
and how to increase reliability and service life of the machine.
In addition to the safety regulations in the operating instruc-
tions, you have to meet the applicable regulations that apply
for the operation of the machine in your country.
Keep the operating instructions package with the machine at
all times and store it in a plastic cover to protect it from dirt and
moisture. Read the instruction manual each time before operat-
ing the machine and carefully follow its information.
The machine can only be operated by persons who were in-
structed concerning the operation of the machine and who are
informed about the associated dangers. The minimum age re-
quirement must be complied with.
In addition to the safety instructions contained in this operating
manual and the specific regulations of your country, the techni-
cal rules generally accepted for the operation of machines of
the same type must be observed.
We accept no liability for damage or accidents which arise
due to non-observance of these instructions and the safety in-
formation.

3. Device description (fig. 1-13)

1.  ON/OFF switch
2.  Lock switch
3.  Handle
4.  Machine head
5.  Moving saw blade guard
6.  Saw blade
7.  Set screw for rotary table
8.  Stop rail
8a.  Adjustable stop rail
8b.  Set screw
9.  Fixed saw table
10.  Table insert
11.  Scale
12.  Pointer
13.  Rotary table
14.  Locking screw for workpiece support
15.  Clamping device (workpiece clamp)
16.  Set screw
17.  Sawdust bag
18.  Workpiece support
19.  Locking screw for clamping device
20.  Locking screw for drag guide
21.  Support stand
22.  Adjusting screw (45°)
22a. Locknut adjusting screw (45°)
23.  Locking screw
24.  Clamping handle
25.  Locking bolt
26.  Adjusting screw (90°)
26a. Locknut adjusting screw (90°)
27.  Scale
28.  Pointer
29.  Flange screw
30.  Outer flange
31.  Guide bracket
32.  Saw shaft lock
33.  ON/OFF switch laser
34.  Battery cover
35.  Laser
36.  Screw (laser)
37.  Transport handle

(A)  90° stop angle (not supplied)
(B)  45° stop angle (not supplied)
(C)  Allen key, 6 mm
(D)  Allen key, 3 mm
(E)  Phillips head screw (table insert)