PWS 125 F6
■
2
│
GB
│
IE
ANGLE GRINDER PWS 125 F6
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all of the operating and
safety instructions. Use the product only as de-
scribed and for the range of applications specified.
Please also pass these operating instructions on to
any future owner.
Intended use
The appliance is intended for the cutting and rough
cutting of metal materials, concrete and tiles without
the use of water. Any other usage or modification
of the appliance is deemed to be improper and
carries a significant risk of accidents. The manufac-
turer accepts no responsibility for damage resulting
from improper use. The appliance is not intended
for commercial use.
Explanation of the symbols used
Before using the appliance for the
first time, read the original operating
instructions and safety instructions.
Using damaged cutting or roughing
discs is dangerous and may cause
serious injury!
Diameter of the disc
Angle grinder
Wear protective goggles!
Wear ear muffs!
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding
Not approved for side grinding
Suitable for grinding metal
Features
Speed setting wheel
ON/OFF switch
Safety lock-out
Spare carbon brushes
Carbon brush cover
Additional handle
6a
Tool holder for the two-hole assembly spanner
Blade guard
Mounting ring
Screws
Blade guard fixture
Spindle locking button
Thread (3x) for additional handle
Clamping nut (see fig. B)
Mounting spindle (see fig. B)
Mounting flange (see fig. B)
Two-hole assembly spanner (see fig. C)
Bulges
Plastic clip
Protective cover
Summary of Contents for 373563 2104
Page 3: ...A B 6a ...
Page 4: ...C D I 0 E F ...