Parkside 364705 2101, Translation Of The Original Instructions

Page: 6 / 41

PMB 1100 B2 ■ 2
│
GB
│
IE
│
NI
│
CY
PORTABLE METAL BAND SAW
PMB 1100 B2
Introduction
Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are a part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all of the operating
and safety instructions. Use the product only as
described and for the range of applications speci-
fied. Please also pass these operating instructions
on to any future owner.
Intended use
The appliance is primarily intended for sawing
metal pipes or profiles.
Any other usage or modification of the appliance is
deemed to be improper and carries a significant
risk of accidents.
The appliance should not be used for industrial
purposes.
Features
Light switch
Speed setting wheel
On/Off switch
Workpiece stop
Workpiece stop screw
Small hex key
Saw blade
Saw blade clamping lever
Figure A
Handle
Wing screw on handle
Protective covers
Locking screws
Figure B
Rubber wheels
Guide rollers
Figure C
Handle on the vice
15a
Quick release
Vice
Cylinder head screws with hex socket
Figure D
Cutting angle adjustment
Long wing screw
Screw for the cutting angle adjustment
Locking pin
21a Nut
Swivel arm
Figure E
Work lamp
Saw table
Drill holes
Package contents
1 portable Metal Band Saw
1 saw table (pre-assembled)
4 wing screws, long (pre-assembled)
4 cylinder head screws with hex socket
(pre-assembled)
1 hex key, small (4 mm)
1 hex key, large (6 mm)
1 set of operating instructions
Technical specifications
Rated voltage 230 V ∼, 50 Hz (AC)
Rated power consumption 1100 W
Cutting width at 90°
127 mm x 127 mm
(without saw table)
Cutting width at 45° 127 mm x 40 mm
(without saw table)
Rated idle speed n
0
0–290 rpm
Saw band speed 0–2.4 m/s
Inclined cuts 0°–45°
Protection class II / (double insulation)
IB_364705_PMB1100B2_IE_NI_CY.indb 2 07.04.2021 15:07:04