6
GB
List of pictograms used
Read the instruction manual!
Never point the product at
people or animals.
Warning of general danger
Keep childen away from the
product!
Explosion hazard!
Low battery level, replace a
new one
Direct current / voltage
b
a
Dispose of the packaging and
product in an environmentally-
friendly manner!
Wear protective gloves!
Wear ear protection!
Wear a dust mask!
Wear suitable protective gloves.
Digit
al inflator PDRD 13 A1
Introduction
We congratulate you on the pur-
chase of your new product. You
have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the
product, please familiarise yourself with all of
the safety information and instructions for use.
Only use the product as described and for the
s
pecified applications. If you pass the product
on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
The digital pneumatic inflator is designed for
inflating and regulating the air pressure of
bicycle tyres, balls, airbeds, rubber dinghies
etc. Use the product only as described and
only for the specific applications as stated.
The product is only intended for private use
only and is not for commercial use. Any use
that is different from the intended use as sta-
ted above is prohibited and there is potential
danger. Damage or injury caused by misuse
or disregarding the above warning is not co-
vered by the warranty or any liability on the
part of the manufacturer.
Note:
The product is not suitable for inflating
car or motorized vehicle tyre.
Parts description
(see fig. A+B)
1
Digital manometer
2
LCD display panel
3
Light / Zero button
4
On / Unit / Off button
5
Inflator
6
Pressure release button
7
Male air fitting coupler
8
Trigger
9
Flexible hose
10
Connector
11
Lock lever