![background image](http://html1.mh-extra.com/html/parkside/360583-2010/360583-2010_translation-of-the-original-instructions_4051551055.webp)
PAMFW 20-Li A1
GB
│
MT
│
51
■
Application
–
removing material residues, such as tile
adhesive, when replacing damaged tiles
–
milling grout on wall and floor tiles .
IAN 360583
IAN 360583
A1
Z64
B2
HCS
IAN 360583
Z 32 C4
Scraper
Materials
mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application
–
removing material residues, such as carpet glue
residue on the floor .
Sanding plate
Materials
Wood and metal (sanding sheets supplied),
wood*, metal*
* Depending on the sanding sheet
Application
–
sanding up to edges and hard-to-reach areas .
Fitting the sanding sheet onto the
sanding plate
♦
Place the sanding sheet centrally on the
sanding plate .
Changing tools
NOTE
►
If you plan to use the dust extraction unit, it
must be connected before fitting or changing
the tool (see . section "Connecting a dust
extraction unit") .
WARNING! RISK OF INJURY!
■
Always remove the battery before working on
the power tool .
♦
If necessary, remove an already fitted tool .
To do this, raise the tool release lever .
♦
Fit the tool (e .g . the plunge saw blade ) onto
the tool holder .
NOTE
►
You can fit the tools in any snap position on
the tool holder .
♦
Lock the tool into place by pushing the tool
release lever back down again .
■
Check that the tool is fitted firmly.
Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury .