Parkside 360333 2010, Translation Of The Original Instructions

Page: 4 / 50

GB NI IE CY
4
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre
-
sents no cause for concern.
The operating instructions
constitute part of this product.
They contain important information on
safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intendend purpose
Only use the pressure washer in the follow-
ing private home areas:
• To clean machines, vehicles, buildings,
work tools, facades, terraces, garden-
ing tools, etc. with a high-pressure
water jet.
• Only use with original accessories and
spares.
• Observe the manufacturer’s instructions
for the device that is to be cleaned.
Content
Introduction .................................4
Intendend purpose .......................4
General Description ......................5
Extent of the Delivery .......................5
Overview .......................................5
Functional description ......................5
Technical data ..............................5
Notes on Safety ...........................6
Explanation of symbols ....................6
Symbols in the manual .....................6
General notes on safety ...................6
Initial Operation ...........................9
Setting up ......................................9
Mains connection ............................9
Operation ....................................10
Interrupting operation ....................10
Ending operation ..........................11
Cleaning and Maintenance .........11
Cleaning ......................................11
Maintenance ................................11
Storage ......................................11
Waste Disposal and Environmental
Protection ...................................11
Guarantee .................................12
Repair Service ............................13
Service-Center ............................13
Importer ....................................13
Spare parts/Accessories .............14
Trouble shooting ........................15
Translation of the original
EC declaration of conformity ......43
Exploded Drawing ............... 46/47