Parkside 359201 2110, Translation Of The Original Instructions, Page: 6 / 169

PMKA 20-Li A1 ■ 2 │
GB
│
IE
CORDLESS NIBBLER 20V
PMKA 20-Li A1
Introduction
Congratulations on the purchase of your new
appliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified range of applications. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is suitable for cutting steel sheet and
aluminium sheet. This appliance is exclusively in-
tended for private use in dry indoor spaces. Any
other usage or modification of the appliance is
deemed to be improper and carries a significant
risk of accidents. The manufacturer accepts no
responsibility for damage attributable to misuse.
Features
ON/OFF switch
Release button for the battery pack
Battery pack*
Battery charge level button
Battery display LED
Hex screw
Measuring groove 1.6 mm
Measuring groove 1.2 mm
Die holder
Die
Hex key
Hex screw
Grooved pin
Hex key
Tool holder
High-speed charger (see fig. D)*
Red charge control LED (see fig. D)
Green charge control LED (see fig. D)
Package contents
1 cordless nibbler 20V
2 grooved pins (1 pre-fitted)
2 hex keys
1 set of operating instructions
Technical specifications
Rated voltage 20 V (DC)
Idling stroke rate 1400 strokes/min
Cutting performance/material thickness max. in
Aluminium
2.5 mm (200 N/mm²)
Steel
1.6 mm (400 N/mm²),
1.2 mm (600 N/mm²),
0.8 mm (800 N/mm²)
Min. cutting radius inside = 40 mm
outside = 50 mm
Cutting track width 5 mm
Battery PAP 20 A3*
Type LITHIUM ION
Rated voltage 20 V (DC)
Capacity 4 Ah
Cells 10
High-speed charger PLG 20 A3*
INPUT
Rated voltage 230–240 V ∼ 50 Hz
(AC)
Rated power
consumption 120
W
Fuse (internal) 3.15 A
T3.15A