Parkside 339103 1910, Operation And Safety Notes

Page: 20 / 73

20 GB/IE
2 1 3
180
0
α =
118 0
(a)
(b) (b)
Set the ON/OFF switch
4
to position
„0“ to switch off the product.
Replacing the brick
RISK OF INJURY!
Always unplug from the mains before work-
ing on the product. Replace a worn or dam-
aged brick (diminished, uneven grinding,
broken brick). You will need a phillips head
screwdriver for this step.
Unscrew the 4 screws
3
on the brick
cover
2
and remove the cover
2
(see Fig. A).
Remove the brick
5
.
Loosen the screw connection
7
keep-
ing the brick
5
in the brick holder
8
with a 27 mm open-end spanner (not
included) or a nut driver (see Fig. B).
Note: Turn counter-clockwise to open!
Remove the metal ring
6
.
Secure the new brick in the brick holder
8
with the flattened edge down and
reinstall the metal ring
6
.
Tighten the screw connection with a
27 mm open-end spanner.
Note: Turn clockwise to close!
Be sure the spring
9
is installed in the
product as shown in Fig. D and insert
the brick into the product. Turn the brick
until it is again precisely fitted as shown
in Fig. A or the brick cover
2
will not fit.
Reattach the brick cover
2
and fasten
in place with the 4 screws
3
.
Maintenance and cleaning
This product is maintenance-free except for
replacing the bricks.
RISK
OF ELECTRIC SHOCK!
Unplug the mains plug from
the socket prior to performing mainte-
nance or repairs.
Clean the product regularly, preferably
immediately after every use.
Use a dry cloth to clean the housing.
Never use petrol, solvents or cleaning
agents that attack plastic.
RISK OF INJURY!
Never open the product except to replace
the brick. Always have repairs or parts
replacements performed at the service
centre or by an electrician. If the input
lead on this product is damaged, it
must be replaced with a specially pre-
pared power cord at the service centre.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the
packaging materials for waste
separation, which are marked
with abbreviations (a) and num-
bers (b) with following meaning: