![background image](http://html1.mh-extra.com/html/parkside/339100-1910/339100-1910_translation-of-the-original-instructions_758342034.webp)
34
GB
IE
•
Do not brake the sawblade af-
ter switching the appliance off
by applying side pressure.
The
sawblade may be damaged, break or
cause a kickback.
•
Tighten the material fi rmly. Do
not support the workpiece by
hand or foot.
Do not touch any
objects or the ground with the saw run-
ning. There is a risk of kickback.
•
Hold the power tool tightly with
both hands while working and
ensure a secure footing.
The
power tool is guided more securely
with both hands.
•
Wait until the power tool has
stopped before placing it down.
The tool insert can tilt and lead to loss
of control over the power tool.
•
Switch the appliance off im-
mediately if the sawing blade
jams.
Spread the saw cut out and pull
the blade out carefully. This can lead
to loss of control over the power tool.
3) SPECIAL SAFETY INFORMATION
DURING SANDING AND
SCRAPING
•
Only use the power tool for dry
sanding. Do not scrape moist
materials.
Penetration of water into
the power tool increases the risk of
electric shock.
•
Avoid overheating the sanded
object and the sander itself.
Pos-
sible fi re hazard.
•
The workpiece gets hot dur-
ing grinding. Do not touch the
machined area, allow it to cool
down.
There is a risk of burning. Do
not use coolants or the like.
•
Always empty the dust con-
tainer before work breaks.
Sanding dust in the dust sack, micro
fi lter, paper sack (or in the fi lter sack or
extraction system fi lter) can self-ignite
under unfavourable conditions such
as fl ying sparks caused by grinding
metals. Particular hazards are caused
if the sanding dust is mixed with paint,
polyurethane residues or other chemi-
cal substances, or if the sanded object
is hot after long working periods.
4) RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Cuts
c) Ear damage if working without ear
protection.
d) Eye damage if suitable eye protection
is not worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic fi eld which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Observe the safety informati-
on and notes on charging and
Summary of Contents for 339100 1910
