Parkside 338733 1907, Translation Of The Original Instructions

Page: 27 / 103

PABS 20-Li D5
GB
│
IE
│ 21 ■
Checking the battery charge level
♦ Press the battery charge level button to check
the charge level of the battery (see Fig . E) . The
status/remaining charge will be shown on the
battery display LED as follows:
GREEN/RED/ORANGE = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Changing tools
Your cordless drill has a fully automatic spindle
lock
.
When the motor is stopped, the power train locks
so that the chuck can be opened by turning
it . After you have attached the desired tool
and tightened it by turning the chuck , you can
continue working (see Fig . F) . The spindle lock is
automatically released when the motor starts (ON/
OFF switch pressed) .
Torque selection ring/drill setting
You can set the torque using the torque selection
ring (see Fig . G) .
♦ Select a low level for small screws or soft
materials .
♦ Select a high level for large screws, hard
materials or removing screws .
♦ Select the drill setting for drilling work by
adjusting the torque selection ring to the
position (see Fig . H) .
2 speed gearbox
CAUTION!
► Only operate the gear selection switch
when the appliance is at a standstill . Other-
wise the appliance can be damaged .
In first gear (gear selector switch in
position 1)
(see Fig . I)
you can reach a speed of approx . 400 rpm and a
high torque . This setting is suitable for all screwing
jobs .
In second gear (gear selector switch in
position 2)
(see Fig . J)
you can reach a speed of approx . 1400 rpm for
carrying out drilling work .
Operation
Switching on and off
Switching on
♦ To start the appliance, press the ON/OFF
switch and keep it pressed in (see Fig . K) .
The LED work light lights up when the ON/
OFF switch is depressed lightly or fully . This
allows for illumination of the work area in low
lighting .
Switching off
♦ Release the appliance's ON/OFF switch to
switch off the appliance .
Adjusting the rotational speed
The ON/OFF switch has a variable speed
control . Pressing the ON/OFF switch lightly
yields a low speed . Increasing pressure increases
the speed (see Fig . K) .
NOTE
► The integrated motor brake ensures rapid
stoppage .
Changing the direction of rotation
♦ Change the direction of rotation by pressing the
rotational direction switch towards the left or
right (see Fig . L) .