Parkside 334065 1907, Operation And Safety Notes

Page: 11 / 34

11 GB/IE
Installation
Note: Remove all packaging materials from the
product.
Attach the spotlight
2
to the stand
4
using the
included locking screw
6
, washer
7 b
and
spring washer
7 a
.
Place the spotlight
2
on a stable substrate with
stand
4
.
Check the stability of the spotlight
2
.
Align the spot into the desired direction. You may
need to slacken the screw of the hinge joint
3
and locking screw
6
. After alignment, tighten
the screw of the hinge joint
3
and locking
screw
6
again, to ensure a secure hold of the
spotlight
2
.
Use
Insert the mains plug
5
in the mains socket.
Note: Insert the mains plug
5
to the corre-
sponding IPX4 socket only during outdoor use.
Or the mains plug
5
should be for indoor use
if no corresponding IPX4 socket can be found.
Switch on the product by turning the rotary
switch
8
.
Turn the rotary switch
8
further to adjust the
brightness level of the spot
2
.
Turn the rotary switch
11
to change the light
color continuously from warm white to cold white.
Note: The accessible surface, especially heat
sink, become very hot when operating, to prevent
burn, use the handle
1
to move the product to
desired position.
USB socket
You can find the USB socket
10
on the back
of the product, it was protected by a protective
cap
9
. You can charge mobile phones, tablets
and other such devices with this USB socket
10
.
Open the protective cap
9
.
Insert the USB plug of the USB cable (not included)
into the USB socket
10
.
Insert the USB plug at another side of the USB
cable into the small electronic devices you wish
to charge.
Switch on the product by turning the rotary
switch
8
.
Remove the USB cable as soon as charging is
complete.
Close the protective cap
9
.
Note: The USB socket
10
can only protected
from water when the protective cap
9
is com-
pletely closed. Water may enter the product if
the protective cap
9
is not corrected posited.
Cleaning and care
Never immerse the product in water or other
liquids. Otherwise the product can be damaged.
Remove the mains plug
5
from the mains socket
and allow the product to cool down.
Clean the product with a lint-free, slightly moist
cloth and mild cleaning agent.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening