background image

Revised   23  June   2000 

Pag 1

.

 

 
 
 
 
 

 

REMBRANDT  PICCOLO  575 w SE 

Single  ended  Hot Re-strike Discharge FRESNEL  SPOTLIGHT 

 
 

INSTRUCTION MANUAL  

 

 

MANUFACTURER 

REPRESENTATIVE 

 

De Sisti Lighting S.p.a. 

Via Cancelliera # 10a, 00040 Albano Laziale (Rome- Italy). 

Tel. +39/06/934991 Fax. +39/06/9343489 

U.R.L.: 

www.desisti.it

        E-mail: 

[email protected]

 

 

 

 

1.  INTRODUCTION 

 

Congratulations on your purchase of a REMBRANDT PICCOLO   575  W SE  lighting fixture from De Sisti 
Lighting . Our commitment to Total Customer Satisfaction and our consolidated experience and leadership in 
design innovation and manufacturing of lighting products for the professional Entertainment Industry means you 
can depend upon the quality of this product. 
 
The REMBRANDT PICCOLO  575  W SE  is a compact, highly efficient fresnel lens Spotlight  ,  using Single  
ended Hot Re-strike metal halide discharge lamps having  G22  base  and  LCL = 70 mm .  
 

De Sisti Lighting S.p.a.

 

Via Cancelliera # 10a, 00040 Albano Laziale (Rome- Italy). 
Tel.

 ..39/06/934991

 Fax.

 ..39/06/9343489

  

U.R.L. Address: 

www.desisti.it

 E-mail address: 

[email protected] 

Summary of Contents for REMBRANDT PICCOLO 575 w SE






Reviews: