Parkside 315259, Translation Of The Original Instructions

Page: 7 / 64

7
CY NI IE GB
Function Description
The electric hedge trimmer is driven by an
electronic motor. The equipment is double-
insulated for safety and does not require
earthing.
The hedge trimmer is equipped with a dou
-
ble-sided safety cutter bar. When cutting,
the blades move backwards and forwards
in linear motion.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and briars.
Please note the following descriptions for
the function of the operating components.
Technical Data
Electric Long-Reach
Hedge Trimmer.....................PHSL 900 A1
Input voltage rating ... 230-240 V~, 50 Hz
Input power ................................900 W
Idle speed n
0
.........................1000 min -1
Cuts/min ...................................... 2000
Safety class ..................................... II
Degree of protection ....................... IPX0
Weight (incl. accessories) . approx. 5.9 kg
Cutting length ............................ 410 mm
Max. recommended
branch thickness ......................... 15 mm
Acoustic pressure level
(L
pA
) ...................86.3 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .... 100.9 dB(A); K
WA
= 1.97 dB
guaranteed ........................ 103 dB(A)
Vibration (a
h
) at the
handle ........... 3.649 m/s 2 ; K= 1.5 m/s 2
round handle ..4.676 m/s 2 ; K= 1.5 m/s 2
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning:
The vibration emission value
may differ during actual use of the power
tool from the stated value depending on the
manner in which the power tool is used.
Safety precautions aimed at protecting the
user should be based on estimated exposure
under actual usage conditions (all parts of
the operating cycle are to be considered,
including, for example, times during which
the power tool is turned off and times when
the tool is turned on but is running idle).
Notes on Safety
This section deals with the basic safety
regulations to be observed when working
with the electric hedge trimmer.
Symbols in the manual
Warning symbols with infor-
mation on damage and injury
prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Always remove the mains plug be-
fore working on the appliance.
Help symbols with information on
improving tool handling.