![background image](http://html1.mh-extra.com/html/parkside/312018/312018_original-instructions-manual_4176693041.webp)
PSTK 800 B2
GB
│
MT
│
37
■
Setting the pendulum stroke
♦
You can use the pendulum stroke switch to set
the pendulum movement of the saw blade .
You can achieve fine, clean cut edges without
pendulum movement (setting “0”). Switch the
pendulum movement off when working on thin
workpieces. You can achieve an increasingly
fast workrate with activated pendulum stroke
(settings 1–3).
Switching on/off
Switching the appliance on:
Slide the ON/OFF switch forward to the position “I”.
Switching the appliance off:
Slide the ON/OFF switch backward to the
position “0”.
Switching the laser/working light
on/off
On/off switch:
Press the ON/OFF switch until the required
function is active.
LASER and WORKING LIGHT → WORKING
LIGHT → LASER → SWITCH OFF
Sawdust blowing function
Switching the sawdust blowing function on:
♦
Slide the sawdust blower function switch in
the position
.
Supporting the extraction function:
♦
Slide the sawdust blower function switch in
the position “0”.
Maintenance and Cleaning
WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work.
■
The appliance must always be clean, dry and
free from oil or grease.
■
To clean the casing, use a soft dry cloth.
WARNING!
■
To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
■
Replace the saw blade as soon as its teeth
are blunt and proper sawing is therefore no
longer possible.
■
Clean the appliance after completing your
sawing work.
■
Remove any dirt (e.g. sawdust). If necessary,
clean the saw blade mounting with a brush or
blow it out with compressed air.