![background image](http://html1.mh-extra.com/html/parkside/292169/292169_translation-of-the-original-instructions_758313032.webp)
PDLS 5 A1
GB
│
MT
│
29
■
Safety instructions for fine spray
systems
■
Keep your work area clean, well lit and free
of paint and solvents, cloths and other inflam
mable materials.
Possible risk of spontaneous
combustion . Have a fully functioning fire extin-
guisher available at all times .
■
Ensure adequate ventilation in the spray zone
and sufficient fresh air in the entire room.
Evaporation of flammable solvents will cause
an explosive environment .
■
Do not spray or clean with materials whose
ignition point is lower than 21°C. Use materi
als based on water, nonvolatile hydrocarbons
or similar materials.
The evaporation of volatile
solvents will cause an explosive environment .
■
Do not spray near ignition sources such as
static electric sparks, open flames, ignition
flames, hot items, motors, cigarettes and sparks
caused by plugging in/unplugging power
cables or by operating switches.
These ignition
sources could ignite a fire in the environment .
■
Do not spray any material if you do not know
whether it is potentially dangerous.
Unknown
materials could cause hazardous conditions .
■
Wear additional personal protective equip
ment such as suitable gloves and a protective
mask/respirator when spraying or handling
chemicals.
Wearing appropriate protective
equipment for the conditions reduces your expo-
sure to dangerous substances .
■
Do not spray yourself, other people or ani
mals. Keep your hands and other body parts
out of the spray jet.
If the spray jet pierces the
skin, seek medical assistance immediately . The
sprayed material can even penetrate through a
glove and into the skin and thus into your body .
■
Do not treat such a penetration injury like a
normal cut. A highpressure jet can inject tox
ins into the body and cause serious injuries.
In the event of a chemical penetration of the
skin, seek medical assistance immediately .
■
Be aware of the potential hazards of the
sprayed material. Take note of the markings
on the container and the manufacturer's infor
mation on the sprayed material, including the
instructions to use personal protective equip
ment.
The manufacturer's instructions are to
be followed to reduce the risk of fire or injuries
caused by poisons, carcinogens, etc .
■
Never spray without the nozzle head fitted.
Using a special nozzle with the appropriate noz-
zle head reduces the likelihood of high-pressure
jets piercing the skin and injecting poisons into
your body .
Summary of Contents for 292169
