![background image](http://html1.mh-extra.com/html/parkside/292169/292169_translation-of-the-original-instructions_758313035.webp)
PDLS 5 A1
■
32
│
GB
│
MT
Switching on:
♦
To switch on, pull the trigger on the air paint
spray gun and keep it pressed in .
Switching off:
♦
To stop working, simply release the trigger on
the air paint spray gun .
Setting the paint volume
You can regulate the paint quantity which is sprayed
using the paint volume regulating screw .
♦
Work out the best settings by carrying out a
test .
Setting the paint jet pattern
The appliance has two settings: round jet and
broad jet .
Round jet
Broad jet
■
Use the round jet for small surfaces, corners
and edges .
■
You can use the broad jet vertically or horizon-
tally for larger surfaces .
♦
Turn the regulator until the desired spray
type has been set .
♦
Work out the best settings by carrying out a
test .
Replacing the nozzle
♦
Screw off the paint volume regulating screw
by turning it in an anticlockwise direction .
♦
Remove the nozzle needle .
♦
Unscrew the union nut together with the
nozzle head .
♦
You can now unscrew the nozzle using a hex
key .
♦
Reassemble the appliance in reverse order .
Maintenance
WARNING! RISK OF INJURY!
Disconnect the tool from the
compressed air supply.
♦
Clean the appliance after every use .
WARNING – PROPERTY DAMAGE!
►
Never submerse the appliance completely in
cleansing agents, otherwise the seals can be
damaged .
►
Do not use any hydrocarbon-based solvents
like benzene, ethyl chloride, etc ., as these
could trigger chemical reactions with some of
the materials in the air paint spray gun . This
can lead to dangerous reactions .
♦
Rinse the air paint spray gun out using a
container filled with a suitable cleansing agent
at low pressure .
♦
Collect the liquid in a container and dispose of
the liquid in an environmentally correct manner .
♦
Oil the moving parts on the trigger of the air
paint spray gun .
♦
If you remove the nozzle during cleaning you
must grease it afterwards . Do not use any
silicon-based lubricants .
Operating the air blow gun
Switching on:
♦
To switch on, pull the trigger on the air blow
gun and keep it pressed in .
Switching off:
♦
To stop working, simply release the trigger on
the air blow gun .
Summary of Contents for 292169
