background image

PSBSA 20-Li A1

GB

IE

NI

 9

 

Maintenance and cleaning

  

WARNING! RISK OF INJURY! Always 

switch the appliance off and remove 
the battery before carrying out any 

work on the appliance.

The cordless combi drill is maintenance-free .

 

The appliance must always be kept clean, dry 
and free from oil or grease .

 

Never allow liquids to get into the appliance .

 

Use a soft, dry cloth to clean the housing . 
Never use petrol, solvents or cleansers which 
can damage plastic .

 

If a lithium-ion battery is to be stored for an 
extended period, the charge level should be 
checked regularly . The optimum charge level is 
between 50% and 80% . The optimum storage 
environment is cool and dry .

NOTE

 

Replacement parts not listed (such as carbon 
brushes, switch) can be ordered via our 
service hotline .

Kompernass Handels GmbH 

warranty

Dear Customer,
This appliance has a 3-year warranty valid from 
the date of purchase . If this product has any faults, 
you, the buyer, have certain statutory rights . Your 
statutory rights are not restricted in any way by the 
warranty described below .

Warranty conditions

The validity period of the warranty starts from the 
date of purchase . Please keep your original receipt 
in a safe place . This document will be required as 
proof of purchase .
If any material or production fault occurs within 
three years of the date of purchase of the product, 
we will either repair or replace the product for you 
at our discretion . This warranty service is depend-
ent on you presenting the defective appliance and 
the proof of purchase (receipt) and a short written 
description of the fault and its time of occurrence .

If the defect is covered by the warranty, your product 
will either be repaired or replaced by us . The repair 
or replacement of a product does not signify the 
beginning of a new warranty period .

Warranty period and statutory claims for 

defects

The warranty period is not prolonged by repairs 
effected under the warranty . This also applies to 
replaced and repaired components . Any damage 
and defects present at the time of purchase must 
be reported immediately after unpacking . Repairs 
carried out after expiry of the warranty period shall 
be subject to a fee .

Scope of the warranty

This appliance has been manufactured in accordance 
with strict quality guidelines and inspected meticu-
lously prior to delivery .
The warranty covers material faults or production 
faults . The warranty does not extend to product parts 
subject to normal wear and tear or fragile parts such 
as switches, batteries, baking moulds or parts made 
of glass .
The warranty does not apply if the product has been 
damaged, improperly used or improperly maintained . 
The directions in the operating instructions for the 
product regarding proper use of the product are 
to be strictly followed . Uses and actions that are 
discouraged in the operating instructions or which 
are warned against must be avoided .
This product is intended solely for private use and 
not for commercial purposes . The warranty shall be 
deemed void in cases of misuse or improper handling, 
use of force and modifications/repairs which have 
not been carried out by one of our authorised 
Service centres .

Warranty claim procedure

To ensure quick processing of your case, please 
observe the following instructions:

 

Please have the till receipt and the item number 
(e .g . IAN 12345) available as proof of purchase .

 

You will find the item number on the type plate, 
an engraving on the front page of the instructions 
(bottom left), or as a sticker on the rear or bot-
tom of the appliance .

Summary of Contents for 291869






























Reviews: