Parkside 291643, Translation Of The Original Instructions

Page: 8 / 48

8
GB IE NI
Third-party manufacturers
Adapter for device output with red cap nut
(5) and Threaded adapter with ‘B’ marking
(6). And Quick-connect adapter (9).
Connecting to high-pressure cleaners of
other manufacturers (without quick-connect
connection system):
1. Unscrew the quick-connect adap-
ter (9) from the hose connection
with the internal thread (8). You
can hold an open-ended span-
ner (WAF20) against the hose
connection with internal thread
(8).
2. Insert the quick-connect adapter
(9) into the quick-connect hose
connection (2) of the high-pres-
sure extension hose (1). You can
hear it click into place.
3. Separate the adaptor for device
output with red cap nut (5) from
the threaded adapter with ‘B’
marking (6) by screwing.
4. Screw the threaded adapter with
‘B’ marking (6) onto the quick-
connect adapter (9).
You can use an open-ended
spanner (AF20) on the threaded
adapter with ‘B’ marking (6) to
help you.
5. Screw the adapter for device
output with red cap nut (5) into
the hose connection with internal
thread (8).
You can use a hexagon socket
wrench (AF6) on the adapter
for the device output with red
cap nut (5) and an open-ended
spanner (AF20) on the hose con-
nection with internal thread (8)
to help you.
6. Mount the high-pressure extensi-
on hose (1) between the device
output and high-pressure hose of
your high-pressure cleaner.
7. Check the connections by pulling
on the high-pressure extension
hose (1).
8. To release the connection on the
quick-connect adapter (9), press
the release button (10) and pull
off the high-pressure extension
hose (1).
You can use an open-ended
spanner (AF20) to release the th-
readed adapter with ‘B’ marking
(6) or the hose connection with
internal thread (8).
After being released on the high-
pressure cleaner, the adapter for
the device output with red cap
nut (5) can be easily unscrewed
with a hexagon socket wrench
(AF6) from the hose connection
with internal thread (8).
Waste disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.