background image

PAMFW 12 A1

GB

 21

 

Operation

Switching on and off

Switching on:

 

Push the ON/OFF switch   forwards to switch 
the appliance on.  
The LED work light   lights up when the appli-
ance is switched on to light up the working area 
in low light conditions.

NOTE

 

The LED work light   may only be used 
without dust extraction unit  .

Switching off:

 

Push the ON/OFF switch   backwards to 
switch the appliance off.

Select oscillation speed

 

Use the speed adjustment wheel   to set the 
required oscillation speed. 
Stage 1: low oscillation speed 
Stage 6: high oscillation speed

NOTE

 

The required speed depends on the material 
being worked and on the working conditions 
and can be determined through practical 
tests.

Maintenance and cleaning

 

 WARNING! RISK OF INJURY! Always 

switch the appliance off and remove 
the battery before carrying out any 

work on the appliance.

 

Do not use any sharp objects to clean the ap-
pliance. Never permit liquids to enter inside the 
appliance. This can damage the appliance.

 

Clean the appliance regularly, preferably imme-
diately after completion of the work.

 

Use a soft, dry cloth to clean the housing. 
Never use petrol, solvents or cleansers which 
can damage plastic.

 

A vacuum cleaner is required for thorough 
cleaning of the appliance.

 

Ventilation openings must never be obstructed.

 

Remove any adhering swarf with a brush.

 

If a lithium-ion battery is to be stored for an 
extended period, the charge level should be 
checked regularly. The optimum charge level is 
between 50% and 80%. The optimum storage 
climate is cool and dry.

NOTE

 

Replacement parts not listed (such as carbon 
brushes, switches and replacement batteries) 
can be ordered via our service hotline.

Warranty

This appliance is provided with a 3-year warranty 
valid from the date of purchase. The appliance 
has been manufactured with care and inspected 
meticulously prior to delivery. Please retain your 
receipt as proof of purchase. In the event of a 
warranty claim, please contact your Customer 
Service unit by telephone. This is the only way to 
guarantee free return of your goods.

The warranty only covers claims for material and 
manufacturing defects, not for damage sustained 
during carriage, components subject to wear and 
tear or damage to fragile components such as 
switches or batteries. This appliance is intended 
solely for private use and not for commercial pur-
poses.  

The warranty shall be deemed void in cases of 
misuse or improper handling, use of force and 
modifications/repairs which have not been carried 
out by one of our authorised Service centres. Your 
statutory rights are not restricted by this warranty.  
The warranty period is not prolonged by repairs 
effected under the warranty. This also applies to 
replaced and repaired components. Any damage 
and defects present at the time of purchase must be 
reported immediately after unpacking, but no later 
than two days after the date of purchase. Repairs 
carried out after expiry of the warranty period shall 
be subject to charge.

Summary of Contents for 273476





























Reviews: