PAMFW 12 A1
■
20
│
GB
Application:
–
removal of material residues, such as tile adhe-
sive, when replacing damaged tiles
–
milling of grout on wall and floor tiles.
Scraper
Materials:
Mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application:
–
removal of material residues, such as carpet
glue residue on the floor.
Sanding plate
Materials:
Wood and metal (sanding sheets supplied),
wood*, metal*
*depending on the sanding sheet
Application:
–
sanding up to edges and hard to reach areas.
Fitting the sanding sheet onto the
sanding plate
♦
Place the sanding sheet centrally on the
sanding plate .
Changing tools
NOTE
►
If you wish to use the dust collection, it must be
connected before fitting the tool (see section
“Connecting a dust extraction device”).
WARNING! RISK OF INJURY!
■
Always remove the battery before working on
the power tool.
♦
If necessary, remove an already fitted tool.
To do this, raise the tool release lever .
♦
Undo the tensioning screw .
(Only for diamond saw blade ).
♦
Fit the tool (e.g. the plunge saw blade ) onto
the tool fitting.
NOTE
►
You can fit the tools in any snap position on
the tool fitting.
♦
Tighten the tensioning screw (Only for dia-
mond saw blade ) and fix the tool in its place
by pushing the tool release lever back down
again.
■
Check that the tool is fitted firmly.
Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury.
