background image

12  GB/IE

Operation / Maintenance  and  Cleaning / Warranty / Disposal

2

3

1

  

At the end of the groove swing the device out 
of the groove and only then switch off the device.

  

Now remove the ridge created between the 
two grooves with a chisel 

16

.

  

Do not work on materials containing asbestos!

   Maintenance and Cleaning

 RISK OF INJURY! 

Switch the 

device off and pull the plug out of the mains socket 
before carrying out any work on the device.

  

Always keep the device clean, dry and free of 
oil or grease.

  

Use a dry cloth to clean the housing.

 If the connection cable  

 

 needs to be replaced, this repair must 
be performed by the manufacturer or a 
representative to prevent safety hazards.

  

Grinding tools must be handled and transported 
with care. Grinding tools have to be stored in such 
a way that they are not exposed to mechanical 
damage or damaging environmental influences.

Note: 

Spare parts not listed (e.g. carbon brushes, 

switches) can be ordered through our call centre.

   Warranty

The warranty for this appliance is for 3 
years from the date of purchase. The ap-
pliance has been manufactured with care 
and meticulously examined before deliv-
ery. Please retain your receipt as proof 
of purchase. In the event of a warranty 
claim, please make contact by telephone 

with our Service Department. Only in this 
way can a post-free despatch for your 
goods be assured.

The warranty covers only claims for material and 
maufacturing defects, but not for transport damage, for 
wearing parts or for damage to fragile components, 
e.g. buttons or batteries. This product is for private 
use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering 
not carried out by our authorized service branch. Your 
statutory rights are not restricted in any way by this 
warranty.

The warranty period will not be extended by repairs 
made unter warranty. This applies also to replaced 
and repaired parts. Any damage and defects extant 
on purchase must be reported immediately after 
unpacking the appliance, at the latest, two days after 
the purchase date. Repairs made after the expiration 
of the warranty period are subject to payment.

GB
Service Great Britain
Tel.:  

 0871 5000 720  
(0.10 GBP/Min.)

e-mail:   [email protected]

IAN 102830

IE
Service Ireland
Tel:  

 1890 930 034  
 (0.08 EUR/Min. (peak)  
0.06 EUR/Min. (off peak))

e-mail:   [email protected]

IAN 102830

  

Disposal

The packaging is wholly composed of  
environmentally-friendly materials that can 
be disposed of at a local recycling centre.

Disposal / Translation of the original declaration of conformity / Manufacturer

Summary of Contents for 102830




































Reviews: