Parkside Performance PSSAP 20-Li C3, Operation And Safety Notes

Page: 38 / 140

37 GB/IE
Removing the saw blade
(Fig . G)
Turn the chuck ring
[ 2]
in a counter-clockwise
direction .
Pull the saw blade out of the saw blade
holder
[ 3]
.
Release the chuck ring
[ 2]
and let it return to
its original position .
NOTE
u
For certain work, the saw blade can also
be inserted after turning through 180° .
˜
Switching on and off
m
CAUTION! RISK OF INJURY!
Always wear protective gloves when
handling or working with the product .
m
CAUTION! RISK OF INJURY!
u
Before switching on the product: Ensure
the saw blade is not in contact with the
workpiece .
u
Ensure your stance is stable . Always hold
the product’s front
[ 9]
and rear handle
[ 7]
firmly with both hands while working
(Fig . H) .
u
Keep your hands away from the saw blade
when the product is in operation .
NOTE
u
The on/off switch
[ 6]
cannot be locked .
(Fig . I)
Switching on:
Release the switch lock
[ 5]
by pushing it in on the left or right side .
Press and hold the on/off switch
[ 6]
.
Regulate the speed as required (see “Speed
control”) .
Switching off: Release the on/off switch
[ 6]
.
When releasing the on/off switch, the switch
lock
[ 5]
moves back into its original position .
˜
Speed control
By using the on/off switch
[ 6]
, you can
progressively control the speed:
Pressure Speed
Gentle pressure: Lower speed
Greater pressure: Higher speed
˜
LED work light
This product is equipped with a LED work light
[ 10]
to illuminate the immediate working area to
improve visibility in poorly lit areas .
The LED work light
[ 10]
lights up automatically
as soon as the product is switched on .
NOTE
u
The LED work light
[ 10]
stays on for an
additional approx . 10 seconds after
switching off the product .