Parkside Performance PSSAP 20-Li C3, Operation And Safety Notes

Page: 37 / 140

36 GB/IE
Connect the power cord with power plug
[ 15]
of the charger
[ 14]
to the socket .
When the battery pack
[ 8]
is fully charged:
Remove the battery pack from the charger
[ 14]
. Then disconnect the power cord with
power plug
[ 15]
of the charger from the socket .
˜
Adjusting the base plate
(Fig . E)
m
WARNING!
Always switch the product off, remove
the battery pack
[ 8]
and let the
product
cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use . Always wear protective
gloves when handling saw blades .
m
CAUTION! RISK OF INJURY!
u
Remove the saw blade from the product
before adjusting the base plate
[ 4]
(see “Inserting/removing the saw blade”) .
u
Do not use the product without having
inserted the base plate
[ 4]
.
To adapt to the workpiece, the base plate
[ 4]
can
be adjusted and swivelled to different positions .
Unlock the base plate
[ 4]
: Turn the locking
lever
[ 1]
in a counter-clockwise direction .
Adjust the desired position of the base plate
[ 4]
by pushing it in or pulling it out .
Lock the base plate
[ 4]
: Turn the locking lever
[ 1]
in a clockwise direction .
˜
Inserting/removing the saw
blade
m
WARNING!
Always switch the product off, remove
the battery pack
[ 8]
and let the
product
cool down before making any
adjustments!
m
CAUTION! RISK OF INJURY!
Saw blades can be sharp and become
hot during use . Always wear protective
gloves when handling saw blades .
m
CAUTION! RISK OF INJURY!
u
Do not use any blunt, bent or damaged
saw blade .
u
Always install a suitable saw blade for the
job .
Inserting the saw blade
(Fig . F)
Turn the chuck ring
[ 2]
in a counter-clockwise
direction .
Insert the saw blade into the saw blade
holder
[ 3]
.
Release the chuck ring
[ 2]
and let it return to
its original position .
Before use: Pull on the saw blade and check
if it is inserted safely and tightly .