Errors and omissions excepted (E&OE). Copyright 2016 Parksafe Automotive Limited. All Rights Reserved .
Wiring Guidance
Please connect the power cable as below :
Connect the yellow wire to the positive pole of battery.
Connect the black wire to negative pole of battery
Connect the red wire to ACC of car
Connect yellow RCA plug to monitor input.
When turning on the ACC of the car, the camera will begin to record a video automatically. When turning off the ACC, it will stop
the recording after delay 6s and save the file automatically.
Notice: If the cable is connected wrongly, it can damage the camera.
Black - Ground
Red - ACC
Yellow - Battery
Yellow RCA - Monitor for viewing or setup
SD Card
1. Confirm the right direction of SD card, inserting in the wrong direction could damage the camera and SD card
2. Use the SD specification conforming high speed SD card, this SD card has the C4 or C6 marking.
3. Format the SD card on the device when first using
NOTE - To keep the camera in good working order you must format the SD card every 4-5 weeks.
