Errors and omissions excepted (E&OE). Copyright 2016 Parksafe Automotive Limited. All Rights Reserved .
Whilst driving through a tunnel, where tunnel lighting is too bright or too dim, the recording quality of the
video can be degraded.
If this product is damaged because of accident or impact and power supply is cut off, the video recording
can be stopped.
If there are foreign substances on the lens or excessive window tinting, the recorded image can be blurred,
distorted or appear dark.
Please be careful when this product is exposed to direct sunlight and turned on for a long time, as the cam-
era may become hot.
We recommend this product to be installed by one of our recommended professional installers.
Please note that the user has a liability for the recorded and stored image/sound data in accordance with
Personal Data Protection Act and related law (statute).
Please use the authentic Silent Witness product/parts that we provide. We will not be held responsible for
the breakdowns and accidents caused by the use of non-authentic Silent Witness products/parts.
Do not drop the product. -It may cause damage or malfunction not covered by warranty.
Do not place near magnets. -It may cause the device to malfunction or operate erratically.
Keep the unit away from other GPS devices. - It may cause interference of the GPS signal rate.
GPS function requires loading time when first powered on. - It can take up to a few minutes for the device to
lock on to satellite signal.
Metallic tinting and heated front windscreens can cause interruption in the GPS signal. - If you vehicle has
this then please experiment mounting the camera in different positions.
Sudden changes of brightness such as entering or exiting a tunnel or extremely dark place may cause a tem-
porary loss in video quality.
The front glass - camera lens should be kept clean. - If it is dirty, recording image quality may be low.
Attach the product in the recommended place. - If it is installed in an obscure place, the image may be
skewed.
WARNING
Do not place near effective range of an air bag. - It may cause malfunction of air bag or accident.
Keep the power socket clean of dust. -A poor connection will result in malfunction.
Install with the power off. (After installation, connect DC jack) - It may cause electric shock or malfunction.
Do not operate the product whilst driving. - It may cause an accident. Stop in a safe place to operate.
Do not pull the power cable, remove by holding the plug and pull. Do not use a damaged cable. -It may
cause cable malfunction, electric shock and fire.
Do not clean exterior with alcohol, volatile or oily solvents. - It may cause deformation of the surface and
malfunction.
Attach the product on the front window firmly. - Clean the front window and fix it firmly, otherwise it may
be detached due to temperature / humidity / dust / shock.
SD CARDS
Please read the below notice for SD cards. We do not take responsibility for data loss or damage caused by SD
cards malfunctioning.
Please use only authentic SD cards. - The manufacturers of the camera do not take responsibility if a non-
recommended card is used.
Do not put foreign substances in to SD card slot. - It may cause a malfunction or SD card inserting problem.
Do not touch the SD card with wet or oily hands. - It may cause malfunction due to card damage.
Push the SD card in fully. Do not force the SD card in to the slot. Ensure the card is the correct way up before
inserting. - If the SD card is not fully inserted then the camera cannot record data.
Before removing the SD card, please check the power off status. - If you pull SD card out during power on
status, it may cause malfunction or data loss.
SD cards are consumables. - SD cards do not last forever and should be checked regularly. SD cards are not
covered by our warranty.
Use a secure case for storing SD cards. - The data may be damaged by static while storing or moving.
