5
2.5.4 Setting other features
Read this chapter to know how to configure the setup and fine-tune the functions
Power on the recorder. Press Menu (Long time press up button ) ,then press up and down button to choose the
icons and press OK button to confirm .
1.Video resolution :FULL HD ,1080P30 ,720P30
2.Photo size: 12M,8M,5M,3M
3.Flicker :50/60Hz Use this function to set the flicker frequency in your area. (uk 50hz)
4.AE ISO :AUTO/100/200/400
5.White Balance
This item is for correction in different colors under different light conditions. When the white balance is set as Auto,
the camcorder compensates different light conditions automatically.
AUTO/Sunny/Incandescent/fluorescent/cloudy
6.AE bias
7.AE meter mode
8 TV type :NTSC/PAL
9.AUTO power off
10..Date time display: Date time/off/date/time
11.Motion detect: off/on
13. Power off screen : off/1minutes/3 minutes/5minutes
14. Video recorder mode: Video + audio / video
15. G-sensor precision: 2.5G/3G/3.5G/4G/4.5G/5G/CLOSE
16. Beep sound: High/low/off
17. USB Mode: Mass storage/USB camera
18. Choose card : Inner card/outer card (this function is optional )
19. Language :English/Russian/Chinese
20. Default setting : Yes/No
This function will restore all the settings to the factory defaults.
21. Format: Yes/no
Use this function to Format the storage medium. Note that all the data stored in the medium will be gone.
23.Firmware version
2.5.5 Stamp :Date time/time /date/car/driver number/off
a.When you choose date & time and car ,the driver number will not be shown on the screen.
Under car mode ,it will display the location latitude and longitude after connect to GPS
b.When you choose date time and driver number , the GPS information will not be shown on the screen.
C. Driver number is 9 character driver number, license plate
