Parklands HS100ATV, Owner'S Manual

Page: 116 / 171

8-116 Periodic Maintenance and Adjustment
2.Clean the surface and the adjacent parts of the spark plug gasket, and then clean up the ash
layer in the thread
3.Install the spark plug and tighten it to the specified torque
tighten the torque
spark plug
17.5Nm
（
1.75 m-kgf
，
12.7 ft-lbf
）
NOTE: When installing the spark plug without a wrench,
to correctly estimate the torque for 1/4 to 1/2 to finger, then tighten to specified torque as soon
as possible
Install the spark plug
Clean the engine air filter element
Check air filter side at the bottom of the hose, if there is a grey layer and water in the hose,
empty tube and cleaning
1.Loosen the bolt first, and then remove the air filter cover