background image

7

SAFETY INSTRUCTIONS

DO NOT OPERATE ON  

GRADES STEEPER THAN 6%

DO NOT EXCEED 

WEIGHT CAPACITY

Due to the possibility of a runaway trailer, operation 

on grades steeper than 6% is not recommended. 

Failing to follow these instructions could result in 

damage, injury, or death.

The Maximum Safe Trailer Weight of your Unit 

depends on the model purchased:

Force 5k: 

up to 5,000 lbs 

Force 10k: 

up to 10,000 lbs

QUICK SET-UP GUIDE

P A R K I T 3 6 0 °   /   F O R C E   5 K   &   1 0 K   M A N U A L

1

POSITION

Switch the Unit into 

Freewheel Mode

 and move it to the trailer. 

Position it underneath your Trailer Hitch.

2

POWER 

TURN ON the Unit by 

Connecting your Battery Cables.

3

HITCH

Switch to 

Engaged Mode

 and 

Connect your Hitch.

4

PARK

Use the 

Toggle Switch

 on the Handle to move your Trailer Forwards 

and Backwards. Park the trailer in your desired location.

If you notice any play in the connection, repeat tightening procedure.

5

DISCONNECT

Disconnect the 

Red Battery Connection Plug

 to TURN OFF the Unit.

Switch the Unit into 

Freewheel Mode

 and

 Disconnect your Hitch

.

6

STORE

Move the Unit to desired storage location, preferrably under cover.

If you have the battery charger option, please ensure the unit is kept 

level to prevent battery acid overflow while charging.

Summary of Contents for FORCE 5K














Reviews: