Parkinson Cowan DSIG 456, Operating And Installation Instructions

Page: 35 / 52

If the ignition system doesn't work there may be a fault with the electrical
supply. First, check the socket by trying out another piece of electrical
equipment in it, if that works correctly renew the fuse in the plug.
If the fuse keeps failing there is a fault in the cooker which must be
put right. Do not use a fuse with a rating higher than 3 amps. Do not
carry out other electrical work. Unplug the cooker and tell your installer.
Reversing the main oven door
You can turn the main oven door around so that it opens on the other
side. Your supplier can arrange this.
Replacing the oven light bulb
You need a 25 Watt small Edison screw with a temperature rating of
T300.
l
Make sure the oven is cool before you replace a bulb.
l
Unplug the cooker.
l
Open the oven door and remove the oven shelves.
l
Place palm of hand at top of lens flat against oven side. Use fingers
to lever lens away from housing.
l
Unscrew the bulb by turning it to the left.
l
Fit a new bulb and then replace the glass bulb cover.
l
Replace the oven shelves.
l
Plug the cooker back into the electricity supply.
The oven light bulb is not covered by the manufacturers guarantee.
D S I G 4 5 6
35
General information