GB
2003/108/CE
Directive
for waste electrical and
electronic Equipments
DISPOSE OF PROPERLY
ENVIRONMENT - NOXIOUS MATERIALS
EUROPEAN MARK CERTIFYING CONFORMITY
TO THE ESSENTIAL REQUIREMENTS OF THE
STANDARDS 2006/42/EC
Proudly
Made
in the
UK
Proudly
Made using
recycled
paper
The manufacturer reserves the right to make amendments to this manual without prior notice
and declines all responsibility for any errors, personal injury or damage to property.
Geared Motor Spec:
Type: Worm & Wheel
Overall speed: 200 rpm
Max rated torque: 320nm
Actual torque: 32nm
Gearbox efficiency: 90%
Output size: 30mm
Mounting position: V5
Angular Backlash: 20' +/- 5' / 0.00582
+/- 0.00145
Lubricated with: Shell Tivela S320
0.48 litres
Electric Motor:
400v 50hz 3 phase Braked Motor
4 pole
IP54
B14 C face mounted
Frame size 80
Output power: 0.75kW
Current @ 400v: 2.2A
Rated speed: 1400rpm
Power factor(cos): 0.67
Ts/Tn: 2.5
Is/in: 4.3
DC Brake In (mA): 150
Zo (starts/hour): 15000
Moment of inertia (Jx 10-4 Kgm2):
17.19
Max brake torque (Nm): 18
Net weight 15kg
PF9
7
00
A
Specification:
CE Approved BS/EN 12453
Dimensions:
250mm x 225mm extruded Aluminium beam Infill –
30mm diameter x 6mm Wall thickness
Power Requirement:
230v, Single Phase, 50Hz, 10 Amps
Drive Motor:
0.75KW’s - 1.1KW’s, 3 Phase
Maximum Span:
8
Metres Drive-Through
Maximum Height:
2.4 Metres (maximum width
8
.0 metres)
3.0
Metres (maximum width 6.0 metres)
Duty Cycle:
100%
Operation Time:
4 Seconds per metre (Variable)
Finish:
Polyester Powder Coated
Operation:
Direct-driven 3 phase motor via Inverter and
Programmable Logic Controller
Access Controls:
Push-button, card readers, tokens, intercoms,
keypads and remote fobs.
in
Parking and access control equipment manufactured in the UK
PF9700 Automated Hinge Gate
