This equipment is part of a large range of traffic flow products. Any of the instructions in this manual should only be carried out
by a qualified service engineer or a competent person.
The following information is a guide only, and whilst we have made every effort to be accurate and correct there may be printing
errors which we cannot be held responsible for.
With a correct installation you can expect to enjoy many years of reliable service from this product, we do however recommend
that the product has a bi-annual service carried out by a qualified engineer.
Thank you for your custom and welcome to the exciting world of Total Traffic Flow Solutions.
/
/
20
!
Important Safety Notice
Manual Swing Gates are designed to Control the flow of
vehicular traffic only. It can be dangerous to allow the passage of
pedestrians and any other self-powered animal or device to
utilise this method of access.
It may be necessary for the end user of this product to provide
an alternative, safe method of access to cater for the previously
mentioned categories.
The end user should fit all necessary signage and warning
notices to either side of the gate, which should be visible and
clear from all directions of approach.
Please sign and date below to say that you have read and
understood this notice before ANY installation work:
The “Warnings” leaflet and “Instruction booklet” supplied with this
product should be read carefully as they provide important information
about safety, installation, use and maintenance.
Scrap packing materials (plastic, cardboard, polystyrene etc) according
to the provisions set out by current standards. Keep nylon or polystyrene
bags out of children's reach.
Keep the instructions together with the technical brochure for future
reference.
This product was exclusively designed and manufactured for the use
specified in the present documentation. Any other use not specified in
this documentation could damage the product and be dangerous.
The Company declines all responsibility for any consequences resulting
from improper use of the product, or use which is different from that
expected and specified in the present documentation.
Do not install the product in explosive atmosphere.
The construction components of this product must comply with the
following European Directives: 89/336/CEE, 73/23/EEC, 98/37/EEC
and subsequent amendments. As for all non-EEC countries, the abovementioned
standards as well as the current national standards should
be respected in order to achieve a good safety level.
Information on using
this manual
Ÿ
Read all information thoroughly
Ÿ
Pay attention to all safety advice
Ÿ
Be aware of the symbols (shown above right and
above left) as they have different meanings. One is an
information symbol, the other a warning.
Ÿ
There are many artists impressions of the product in
this manual you should refer to the images as a guide
only.
Professional CAD
drawings should be used as
a reference drawing and nothing else. As before every
effort has been made to be 100% accurate in this
manual but we cannot make any guarantees.
Ÿ
As we constantly innovate our products we may
change the quoted spec and any other details that
have been documented in this manual so you should
always refer to the supplier to see if the manual that
was shipped with your product is the latest edition.
Ÿ
As with all installations, only competent and skilled
personnel should carry out the procedures detailed in
this manual.
Ÿ
Be sure to fill out and complete
ALL
paperwork where
instructed as this manual is the equipments log book
and maintenance manual.
in
Parking and access control equipment manufactured in the UK
Manual Swing Gate
