1
WCS-SIF-01
Training & Maintenance Manual
Pneumatic
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
How To Order Add-A-Fold
Assemblies
1. List Add-A-Fold Assembly call out. This automatically
includes the end plate kit assembly.
. List complete Valve and Base model number. List left to
right, LOOKING AT THE CYLINDER PORTS on the #1
end of the manifold. The left most station is station 1.
Station 2
Station 1
#14 End
#12 End
Example
Application requires a -Station manifold with weld block and
valves, and requires isolation between station 1 and for port
#3 galley only.
Item Qty. Part No.
01
1
AAHE00
0
1
HVXHG0B9C ...................................Station 1 &
03
PS411157MCP ....................................Station 1 &
04
1
WPJ1XXXN .................................................Station
05
1
HEVXHG0B9C ..........................................Station
06
1
PS363P .....Galley 3 Isolation Between Station 1 &
Valve Series
H2 Right & Left
End Plate
Port Type
0 NPT
1 BSPP “G”
Valve
End Plate
Port
Number of
Series
Type
Type
Stations
AA
H2
S
0
02
Add-A-Fold Assembly Model Number
Example:
2-Station Manifold with (2) H2 Valves
On Manifold Bases
End Plate Type
D
†
25-Pin
E
†
19-Pin
G
†
M3, 1-Pin
S Standard -
Non-collective Wiring
† Collective Wiring Module
Included.
NOTE:
Construct manifold assemblies from left to right while looking at
the cylinder ports.
Ordering Information
Number of
Stations
02
* Only Available
with -Station
Manifold when
Used in Welding
Applications.
